Good Measurement Report for ATG Electronics iBright™ T8s issued by OliNo Renewable Energy

Date Announced: 06 May 2009 According to OliNo’s measurement report, power factor of iBright™ T8s remains high, between 0.93 and 1.0 when the voltage is varied over the entire range of values from 100 - 250 V. This test result demonstrates that ATG Electronics iBright™ T8s is more energy-efficient than ordinary LED Fluorescent Lights on the markets. Features:-Highest ReliabilityiBright™ T8s are the stablest LED fluorescent light, as 1) they are made of CREE chip SMD LEDs, with low light decrease and good heat dissipation; 2) they are using specially designed aluminum housing with good heat dissipation, and have no heat buildup inside; 3) they are using external constant current power supplies; and 4) they are using specially designed loop circuit, one LED fail won’t make the whole fluorescent light fail.-Higher EfficacyiBright™ T8s EPS are using original CREE chip SMD LEDs, of high efficacy (typical 90lm/w).-Higher EfficiencyPower factor of iBright™ T8s remains high, between 0.93 and 1.0 when the voltage is varied over the entire range of values from 100 - 250 VAC. Recommended Applications-General illumination for homes, offices, restaurants, hotels, malls, buses, trains, warehouses, parking lots etc; -Task lighting for cabinets, cupboards etc in your homes, restaurants, and kitchens or any other places where accent lighting is required. -Retail display lighting for the articles in your stores and shops;-Back lighting for square billboards or advertisement boards.

Contact
ATG Electronics Corp. International Sales Department Tel: +86-21-33932667 Fax: +86-21-33932677

E-mail:[email protected]

Web Site:www.atgelectronics.com